Spreadsheets and budget talks. Got a bit more in the trenches with the water sensors and such. Links to all of that included. Most of what I’m going to be ordering however is the motor controllers and the systems I’ll be using to include their status on the RV-C bus.
Amazon links, as usual, I get a cut from anything purchased from these links. It will go towards this project and the channel in general.
=================================================
things discussed in stream:
build:
Fuel Pressure Sensor for Oil Fuel Air Water (100PSI)
https://amzn.to/3ZaTyK4
Floor Water Sensor for Flood and Leak Detection (6 ft)
https://amzn.to/40ZKKcG
Taidacent Non Contact Liquid Level Sensor Contactless Water Level Sensor Externally Attached Pipe Water Float Switch NPN Output Capacitive
https://amzn.to/3B3sXGR
VEVOR Linear Actuator 12V, 20 Inch Waterproof IP65 Linear Actuator, 660lbs/3000N 0.19″/s Linear Motion Actuator with Mounting Bracket for Outdoor Use
https://www.vevor.com/linear-actuators-c_11633/vevor-linear-actuator-12v-20-inch-ip65-waterproof-actuator-660lbs-3000n-0-19-s-p_010975272158
Adafruit RP2040 CAN Bus Feather
https://www.adafruit.com/product/5724
Pololu Dual G2 High-Power Motor Driver 18v18 Shield for Arduino
https://www.adafruit.com/product/5724
=================================================
Related Links:
https://connected-me.com
Davinci Resolve:
https://www.blackmagicdesign.com/products/davinciresolve
Drone:
https://amzn.to/3ZrDANf/
Spreadsheet link
https://docs.google.com/spreadsheets/d/1Yoj2GmsPn_RzkVv6DY79T7w3IGeKUzjuKwVdRm-dcc0/edit?usp=sharing
Tinkercad Links:
https://www.tinkercad.com/things/gYobWRFzby7-m100
https://www.tinkercad.com/things/2GuhNDIEQy8-renogy-box
— Watch live at https://twitch.tv/attentiontoodetail